Select Page

Our strength will make you incredible. You can try a part of the questions and answers about IBM C2150-620 Latest Test Blueprint exam to test our reliability. Do you want to pass the IBM C2150-620 Latest Test Blueprint exam better and faster? Then please select the Bestwaytobuildmuscles. This part of the candidates need to be fully prepared to allow them to get the highest score in the C2150-620 Latest Test Blueprint exam, make their own configuration files compatible with market demand. IBM C2150-620 Latest Test Blueprint certification exam is among those popular IT certifications. The opportunity always belongs to a person who has the preparation.

IBM Certified System Administrator C2150-620 We also offer a year of free updates.

IBM Certified System Administrator C2150-620 Latest Test Blueprint - IBM Security Network Protection (XGS) V5.3.2 System Administration Within a year, only if you would like to update the materials you have, you will get the newer version. Its accuracy rate is 100% and let you take the exam with peace of mind, and pass the exam easily. In order to meet the needs of each candidate, the team of IT experts in Bestwaytobuildmuscles are using their experience and knowledge to improve the quality of exam training materials constantly.

Which one is your favorite way to prepare for the exam, PDF, online questions or using simulation of exam software? Fortunately, the three methods will be included in our C2150-620 Latest Test Blueprint exam software provided by Bestwaytobuildmuscles, so you can download the free demo of the three version. Choosing the right method to have your exam preparation is an important step to obtain C2150-620 Latest Test Blueprint exam certification. Certainly, we ensure that each version of C2150-620 Latest Test Blueprint exam materials will be helpful and comprehensive.

IBM C2150-620 Latest Test Blueprint - So, the competition is in fierce in IT industry.

The world is changing, so we should keep up with the changing world's step as much as possible. Our Bestwaytobuildmuscles has been focusing on the changes of C2150-620 Latest Test Blueprint exam and studying in the exam, and now what we offer you is the most precious C2150-620 Latest Test Blueprint test materials. After you purchase our dump, we will inform you the C2150-620 Latest Test Blueprint update messages at the first time; this service is free, because when you purchase our study materials, you have bought all your C2150-620 Latest Test Blueprint exam related assistance.

Instead of wasting your time on preparing for C2150-620 Latest Test Blueprint exam, you should use the time to do significant thing. Therefore, hurry to visit Bestwaytobuildmuscles to know more details.

C2150-620 PDF DEMO:

QUESTION NO: 1
The System Administrator of a company has purchased IP Reputation license for a new XGS appliance. After doing the initial setup of XGS, it is registered to SiteProtector (SP) and IP Reputation license is added in SP agent/module licenses. However, Local Management Interface (LMI) still shows no IP reputation license.
What should the System Administrator do to get the appliance to utilize the license?
A. Access XGS using CLI and restart "License and update" service.
B. Add a network Access Policy rule using Geolocation object.
C. Access XGS using CLI and restart "Siteprotector communication" service.
D. Add a Network Access Policy Rule using "Range Address" object for a range of IP Addresses.
Answer: B
Explanation:
The IP Reputation module can be activated by adding the following object types to your Network
Objects list and adding them to a Network Access Policy rule :
Address > Geolocation
Application > IP Reputation Category
References: http://www-01.ibm.com/support/docview.wss?uid=swg21973893

QUESTION NO: 2
A System Administrator has deployed an XGS. The NAP policy is configured to generate a local log event for every accepted network connection, for example, the Event Log object is enabled for the default Accept NAP rule. Due to the number of network connections, the administrator is concerned that this could take up too much disk space on the XGS.
Which configuration should the Administrator change to ensure that this does not happen?
A. The Event Log object should be edited and the percentage of the total event storage limit used for
NAP events should be set.
B. The Event Log object should be deleted and recreated with a new storage limit.
C. The Event Log object should be cloned and the new object should have the percentage of the total event storage limit for all logs set.
D. the Event Log object should be cloned and the new object should only have NAP event logging enabled and the percentage of the total event storage limit used for events should be set.
Answer: A
Explanation:
By default, the maximum storage space for events is set to 2048 MB (2 GB). Events are stored in a database, which estimates the size of each event at 500 bytes, which means the database can store a maximum of 4,096,000 events.
You can distribute the maximum events among different event types. When the event count for an event type exceeds 90% of the maximum event allocation, older event data is erased and overwritten.
Note:
You can adjust the maximum size using the following tuning parameter:
Key: events.response.logdb.disklimit
Value: 2048
The default value is 2048 MB (2 GB). To increase the maximum size to 4 GB, change the value to
4096.
References: Implementation Guide for IBM Security Network Protection ('XGS for Techies') second edition, Version 2.0

QUESTION NO: 3
Which configuration should be used to ensure that traffic flow is not interrupted when the hypervisor kernel moves traffic to a different ESXi host?
A. Configure the ESXi hosts portgroups to operate in promiscuous mode and assign the protection interfaces of the XGS for VMware to the ingress and egress distributed virtual switches.
B. Route the traffic out of the VMware kernel and to a physical XGS 4100 appliance and then back to a distributed virtual switch for inter-hypervisor switching.
C. Install the XGS for VMware virtual bypass unit, place the distributed virtual switch in promiscuous mode, and add the interface of the virtual bypass unit to the distributed virtual switch and the switch with the physical NIC.
D. Install the XGS for VMware virtual bypass unit, place the portgroups on the distributed virtual switch in promiscuous mode, and add the interfaces of the virtual bypass unit to the distributed virtual switch and the switch with the physical NIC.
Answer: A
Explanation:
The network server must be in the same network as the compute nodes. If the network server is on the VMware virtual machine, the port group to which it is connecting must have the VLAN ID option set to All (4095). The port groups to which the network server connects must be configured to accept
Promiscuous Mode. If the network server is outside vCenter (a physical machine, for example), it must be able to connect to the trunk port with the ESXI hosts.
References:
https://www.ibm.com/support/knowledgecenter/en/SST55W_4.3.0/liaca/liaca_deploy_network_co nsiderations.html

QUESTION NO: 4
A company wants to implement user authentication for access to HTTP/HTTPS services against active directory using a single domain controller and multiple XGS appliances.
Which authentication deployment method should be used to achieve this?
A. Deploy user authentication through the User Authentication Portal to prompt users for local XGS user credentials.
B. Deploy passive authentication to authenticate users automatically using local XGS user credentials.
C. Deploy user authentication through the User Authentication Portal to prompt users for their
Active Directory credentials.
D. Deploy passive user authentication to authenticate users automatically when they log on to the network using Active Directory.
Answer: D
Explanation:
Configuring passive authentication with the Active Directory server.
This use case describes how to configure passive authentication to control web access based on user identity. Passive authentication requires installing the Logon-event Scanner software on the Active
Directory server. In this example, a Windows domain user logs on to a client machine that belongs to a Windows domain. The Logon-event Scanner gathers the Windows logon events and sends the information to XGS. This allows for controlling user access to websites without requesting the user to authenticate to XGS.
References: Implementation Guide for IBM Security Network Protection ('XGS for Techies') second edition, Version 2.0, page 151

QUESTION NO: 5
A System Administrator wants to install a snapshot during the first time configuration of an
XGS appliance.
How can this be done?
A. Use a console cable connection.
B. Use the front panel USB port.
C. Use the Command Line interface over SSH.
D. Use the web-based Local Management Interface.
Answer: C
Explanation:
Log in to the Local Management Interface (LMI) of the XGS sensor and navigate to Manage System
Settings > Snapshots.
The Security Network Protection (XGS) has removed root access for appliance security. In place of root access, IBM has developed a predefined set of the module commands to allow console and SSH
CLI access. The modules available are broken up into a hierarchical structure with commands specific to each module. The prompt changes to display the module you are in and displays a list of the available commands.
Notes:
At any point, type help to display a list of the available commands.
The tab key can be used to finish commands (if you wanted to enter support, you can type su then tab key to complete support).
Example:
References: http://www-01.ibm.com/support/docview.wss?uid=swg21984900

We are trying to offer the best high passing-rate Cisco 400-101 training online materials with low price. For example like IBM CompTIA SY0-501 certification exam, it is a very valuable examination, which must help you realize your wishes. We are trying our best to offer excellent Oracle 1z1-477 practice test materials several years.

sitemap